Carry your event-sized ID credentials with ease using this vinyl badge holder. Each holder features a thumb notch that makes it easy to slide your card in and out.
This badge holder is meant for use with horizontal credentials.
Choose the attachment type that works best for your use.
| Design Type | Flexible |
| Orientation | Horizontal or Vertical |
| Thickness | Slot & Chain Holes: 0.04" Slot Holes: 0.04" Clip and Slot & Chain Holes: 0.04" Pin-Clip Combo: 0.02" |
| Insert Size | Event |
| Material | Vinyl |
| Capacity | Single-card |
| Outer Dimensions | Slot & Chain Holes: 4.3 x 3.9" Slot Holes: 4.3 x 3.9" Clip and Slot & Chain Holes: 4.25 x 3.875" Pin-Clip Combo: 4.33 x 3.35" |
| Insert Dimensions | Slot & Chain Holes: 4.0 x 3.17" Slot Holes: 4.0 x 3.0" Clip and Slot & Chain Holes: 4.0 x 3.3" Pin-Clip Combo: 4.0 x 3.0" |
| Extraction Type | Manual |
| Load Type | Top |
| Attachment | Slot & Chain Holes, Slot Holes, Clip and Slot & Chain Holes, or Pin-Clip Combo |
| Color | Clear |
| Clothing-friendly | No |
| Resealable closure | No |
| Locking card case | No |
| Anti-print transfer | No |
| Shielded for identity protection | No |
| Eco-friendly | No |
| Recyclable | Yes |
| Imprintable | Yes, Contact Us |
SIGN UP NOW!
Be the first to know about New Products, Specials and more! SIGN UP NOW!
|
|
|
× | ||||||
USA
CA
![Vinyl Vertical Badge Holder–Flap Closure [2-5/8" x 3-7-8"] - IDenticard.com](http://identicard.com/cdn/shop/products/506-35FS_290x290_crop_center.jpg?v=1598027655)
![Vinyl Vertical Badge Holder–Flap Closure [2-5/8" x 3-7-8"] - IDenticard.com](http://identicard.com/cdn/shop/products/506-35FS_1_290x290_crop_center.jpg?v=1598027655)
